Not Just Stand Builders.
Stand Manufacturers.
Most UK exhibition stand builders — and most UK stand contractors — are resellers or fabricators. They buy materials, project-manage a build, and charge you for the labour. Commission a stand through a conventional contractor and your brief travels through at least three parties — contractor, designer, fabricator — before a single length of aluminium is cut. Every handoff adds cost, adds time, and dilutes accountability.
T3 eliminates that chain entirely. Tecna Display Ltd is the designer and sole manufacturer of the T3 modular display system — a globally patented, UK-manufactured framework used in over 40 countries. When you work with T3 you deal directly with Jonathan Evitt, who designed the system and holds its patents, and Philippe Van Ameyde, who runs the business — the people who make the thing, not the people who outsource it.
No agents. No intermediaries. No mark-up. Just the manufacturer, working with you directly — from ExCeL London to EICC Edinburgh and every venue in between. It is why L'Oréal, Gucci, Armani Beauty, YSL Beauty, Lancôme, Kiehl's, Icelandair, Gazelle Bikes and Duca del Cosma choose T3 — not because we are the cheapest, but because for premium brands at important shows, manufacturer-direct is the only relationship that gives complete accountability.
"Most exhibition stand builders and contractors are project managers. They take your brief, send it to a manufacturer they don't own, and manage the handoffs. We're the manufacturer. I designed the connector in 1981. We hold 30+ patents on it. We cut the aluminium in Harlow. When you ask whether a specific curve at a specific diameter is achievable, you get an engineering answer — not a call to a third party."
— Jonathan Evitt, Chairman & Founder, Tecna Display Ltd · Designer of the T3 system since 1981
Why Manufacturer-Direct
Wins On Show Day.
Four things separate T3 from every other UK exhibition stand builder or contractor. All four are direct consequences of being the manufacturer.
Manufacturer Pricing, No Mark-Up
Every UK stand contractor adds margin between the factory and you. T3 is the factory, so there is no intermediary — you pay what the stand actually costs to design and build. See our cost guide for 2026 pricing.
Pre-Build at Harlow, Every Stand
Every custom T3 stand is fully assembled at our Harlow factory before it ships. You are welcome to inspect it. Problems get solved in the workshop, not discovered on the show floor at seven in the morning.
30+ Patents, Genuine Capability
Custom curves to 0.5mm, any joint angle, any RAL colour, integrated LED. Because we engineer the connector, “can you do this?” gets an engineering answer, not a maybe from a supplier the contractor has never met.
Reusable, Built Once, Used Forever
We don't build single-use timber that gets skipped after one show. Every T3 stand reconfigures indefinitely with only graphics changing — 70% less waste, and a far lower cost per show across a programme.
From Brief To Venue.
No Handoffs.
Brief & Free 3D Design
Tell us your show, space and brand. A full 3D design and itemised quote comes back within 24 hours — free, direct from the manufacturer.
Manufacture & Pre-Build
We cut, machine and powder-coat every component in Harlow, then fully pre-build your stand and invite you to inspect it.
Delivery & Build
Delivered to any UK or European venue. Full install by our team, or tool-free self-build by yours in 2–4 hours.
Storage & Reuse
We store your stand between shows across Harlow, Trappes and the BDC. Next show, it reconfigures — only the graphics change.
A Full Stand, Built.
Tool-Free, On The Floor.
This is a T3 build at Viscom in Italy, sped up. No power tools, no specialist contractors, no fabrication on site — just the tool-free Twist & Lock system going together by hand. It is the same build your own team can do in 2–4 hours, or that ours will handle for you.
Every Type Of Stand.
One Modular System.
Custom Exhibition Stands
Genuine bespoke — frame and all, to your brief.
Modular Exhibition Stands
Tool-free, reusable, any configuration.
Shell Scheme Upgrades
A premium look inside any shell scheme.
Island Exhibition Stands
360-degree open, backlit, large format.
Backlit Exhibition Stands
T3 Wandlight — 360-degree LED, 70,000hr.
Exhibition Stand Hire
Fully contracted, installed and collected.
Retail Display Systems
Shop-in-shop and brand environments.
Sustainable Stands
70% less waste, ESG documentation.
European Stands
Brexit-proof EU operation from Trappes.
Design Without Limit
Custom curves to 0.5mm, any joint angle.
T3 Snapify
SketchUp plugin — design it yourself, quote instantly.
Straight Answers
On Price.
Most stand builders will not put a number on a page. We will. These are honest starting points for a T3 stand, manufacturer-direct with no contractor margin on top. Final cost depends on floor size, graphics, lighting and whether you buy or hire — but this is the territory.
Because a T3 stand is reused rather than rebuilt, the number that actually matters is cost per show, not cost per stand. A stand used four times costs a quarter of what the invoice says. See the full breakdown in our exhibition stand cost guide, or compare owning against hiring in our hire vs buying guide.
You Do Not Have To Own It.
T3Xtra Exhibition Stand Hire.
Plenty of exhibitors do one or two shows a year and have nowhere to store a stand between them. That is what T3Xtra is for: a custom-designed T3 stand on a per-show basis, installed before you arrive and collected after you leave. Same system, same factory, same finish — without the capital outlay.
Hire It — T3Xtra
Best if you exhibit once or twice a year, or want to test a design before committing to it.
- Custom designed to your brief, not a catalogue stand
- We install before the show and collect afterwards
- No capital outlay and nothing to store
- From around £1,000 per show for a shell scheme package
- Hired direct from the manufacturer, not a rental middleman
Own It — Buy Outright
Best if you exhibit three or more times a year, or want the same stand working across a whole season.
- Reconfigures for a different floor plan at every show
- Only the graphics change between events
- We store it at Harlow between shows if you'd rather not
- Cost per show falls every time you use it
- Backed by a 10-year structural warranty
Not sure which way round it works for you? Our hire vs buying guide runs the numbers over a three-year show programme, or just tell us your calendar and we will tell you honestly which is cheaper.
Real Brands.
Real Stands.
Design It Yourself.
T3 Snapify For SketchUp.
T3 Snapify is the only SketchUp extension built specifically for the T3 system. Developed by T3 with SketchUp specialists Holygon, it puts the real T3 component library and six T3-specific tools directly inside SketchUp — Snap, Pull, Profile Paint, Quote, Slide and Itemise.
Profiles lock together exactly as they do in real life, so what you draw is buildable. Finish the model, hit Quote, and Snapify generates a full itemised RRP price list and bill of materials automatically — no manual counting, no spreadsheets.
Free 30-day trial with full access to every feature and the complete T3 library. No payment details required.
Explore T3 Snapify →Snap & Pull
Components auto-align at a click, and you can drag whole walls and bays into place in one gesture.
Real T3 Library
Every profile and connector — Channel, Airframe, Fusion, Ultralite — not generic blocks.
Instant RRP Quote
Finish the model and Snapify prices it, itemised, straight from the components you used.
Bill Of Materials
A full picking list by component type — hand it straight to the factory or warehouse.
Every Major UK Venue.
One Stand Builder.
T3 delivers and installs at every major UK venue from our Harlow warehouse — with specific experience of each venue's regulations, build windows and logistics. Exhibiting further afield? Our approved partner network builds T3 stands across the world, so a UK brief can become a stand on any continent.
Business Design Centre
On-site resident supplier at the BDC, Islington. On-site stock, faster build windows, and an exclusive resident eco discount for BDC exhibitors.
View venue → LondonExCeL London
London's largest trade show venue. 400+ events a year across 18 halls — DSEI, World Travel Market, IFE and more.
View venue → LondonOlympia London
Grand, National and Empire halls. Reopened June 2026 after a £1.3bn transformation. London Book Fair, Grand Designs Live, Olympia Beauty.
View venue → MidlandsNEC Birmingham
The UK's largest venue. 18 halls, 186,000m2, 160+ shows a year. Spring Fair, Crufts, InstallerSHOW and more.
View venue → North WestManchester Central
The North's premier venue. DTX, Housing Manchester, Connected North and the wider North West circuit.
View venue → ScotlandSEC Glasgow
Scotland's largest exhibition campus — SEC Centre, Armadillo and OVO Hydro. Flat-packed freight keeps Scottish delivery affordable.
View venue → ScotlandEICC Edinburgh
Europe's leading conference venue, 200,000+ delegates a year. Major medical, pharmaceutical and scientific congresses.
View venue → South WestBristol
Ashton Gate, the Passenger Shed and Bristol's city centre venues. The UK's first European Green Capital — where reusable stands matter.
View venue → UK-WideEvery Other UK Venue
Harrogate, Farnborough, Sandown, Alexandra Palace, hotel and corporate venues. Tell us your show and we'll confirm within 24 hours.
View venue →Stand Builder Guides.
Exhibition Stand Builders UK — FAQs.
What makes T3 different from other UK exhibition stand builders?
What is the difference between an exhibition stand builder and a contractor?
Do T3 build custom exhibition stands?
How much does a T3 exhibition stand cost?
Can T3 build and install my stand for me?
Which UK venues do T3 deliver to?
Can T3 contract exhibition stands for European shows?
Can T3 build my stand overseas?
Two Queen's Awards.
One Manufacturer.
Tell us your show, your space and your brand. A full 3D design and itemised quote comes back within 24 hours — free, and direct from the manufacturer.
Get A Free 3D Design →